Searched for
SEMI CRYOGENIC ENGINE
ISRO, Roscosmos discuss delivery of semi-cryogenic engines in Moscow; draft contract under approvalISRO held technical discussions with Russia's Roscosmos in Moscow for semi-cryogenic engines, crucial for India's heavy-lift launch vehicle...
Agnikul’s 'Agnite' test marks breakthrough in 3D-printed rocket enginesAgnikul Cosmos, an Indian space startup, has achieved a major milestone. They successfully test-fired Agnite, the world's largest single-pi...
Spacetech startup Agnikul Cosmos 3D prints booster engine in 7 days; eyes up to 30 launches a yearWith this process, production timelines have been cut by as much as 90-97% while improving repeatability and reducing failure points. The c...
India, Russia set to deepen space ties; finalise deal for semi-cryo engineThe plan of space cooperation in future covers several joint areas, including engine development, crewed missions, orbital stations, person...
Agnikul ignites India’s first electric motor-driven semi-cryogenic rocket engineThe spacetech startup’s cofounder and CEO shared a video of the engine being throttled to different levels of thrust. Electric motor-driven...
ISRO's semi-cryogenic engine hits the launch pad in a stellar leap for India’s space ambitionsIn a significant step for India's space missions, ISRO successfully tested its semi-cryogenic engine at its Tamil Nadu facility. The engine...
Agnikul test launches world’s first rocket with 3D printed engineAgnikul official statement said, the vehicle was completely designed in-house and was powered by the world's first single piece 3D printed ...
After four failed attempts, space startup Agnikul Cosmos carries out successful sub-orbital launch of Agnibaan rocketChennai-based space start-up Agnikul Cosmos achieved a significant milestone on Thursday by conducting a successful sub-orbital test-flight...
ISRO developing semi-cryogenic engine working on liquid oxygen keroseneISRO develops a 2,000 kN semi-cryogenic engine using LOX Kerosene propellant at IPRC, Mahendragiri. LPSC leads with ISRO support, achieving...
Agnikul puts off for third time launch of Agnibaan sub-orbital rocketChennai-based space start-up Agnikul Cosmos on Sunday called off the maiden launch of its 3D-printed, semi-cryogenic Agnibaan rocket about ...
PM Modi likely to reveal names of pilots for Gaganyaan on Tuesday; inaugurate space projects worth Rs 1800 crore in KeralaPrime Minister Narendra Modi will visit Vikram Sarabhai Space Centre (VSSC) to inspect India’s first human spaceflight mission 'Gaganyaan'....
Chennai-based Agnikul prepares for maiden sub-orbital flight of Agnibaan rocketChennai-based Agnikul Cosmos is preparing for the sub-orbital test flight of its 3D-printed rocket Agnibaan SubOrbital Technological Demons...
ISRO terminates semi-cryogenic engine test after sudden spike in turbine pressure and speedThe Indian Space Research Organisation terminated the first hot test on an intermediate configuration of the semi-cryogenic engine followin...
HAL's rocket engine manufacturing facility inaugurated in KarnatakaThe state-of-the-art Integrated Cryogenic Engine Manufacturing Facility (ICMF), set up over an area of 4,500 square metres houses over 70 h...
HAL sets up Rs 208 cr rocket engine manufacturing facilityIn 2013, an MOU was signed with ISRO for establishing the facility for manufacturing cryogenic engine modules at HAL, Aerospace Division, a...
ISRO working to use kerosene as fuel for semi-cryogenic engineThe advantage of using this semi-cryogenic engine in the launch vehicle is that it uses refined kerosene which is lighter than liquid fuel.
Former ISRO chief G Madhavan Nair pitches for human space flight, reusable rocketAccording to ISRO officials, the space agency has been working on some critical technologies in recent years for the human spaceflight miss...