Selling old gold jewellery? These hidden deductions could shrink your payout
While the act of selling your old gold jewellery may look easy, it consists of detailed computations that can greatly impact your earnings. Gaining clarity about factors like net gold weight, purity, and prevailing buying rates for old gold is key...

Selling old gold? Don't settle for a low payout
A jeweller does not simply weigh your old necklace or bangles and pay you according to the displayed 22K or 24K gold rate. The final value depends on how much actual gold the jewellery contains, its tested purity, the buyer's old-gold purchase rate and the deductions applied during valuation. This is where sellers can lose money without realising it.
So, how is old gold jewellery actually valued? What deductions are legitimate, and how can you ensure that you get a fair price?
Selling old gold jewellery: How is its value calculated?
The first thing to understand is that the value of old jewellery is determined by the amount of gold it contains, not its total weight.The valuation should be based on three key factors: net gold weight, tested purity and the applicable buying rate, says Aarav Bafna, Director, Akoirah by Augmont.
The process generally involves the following steps:
Step 1: Weigh the jewellery
The jeweller first weighs the entire piece to arrive at its gross weight. This includes the gold as well as any stones and other non-gold components.
Step 2: Calculate the net gold weight
A necklace with gemstones, enamel, lac, wax or other non-gold components may weigh considerably more than the gold it contains. These components have to be excluded before the gold value is calculated.
For instance, if a necklace weighs 20 grams and contains 1.5 grams of stones, its net gold weight is 18.5 grams.
Step 3: Test the purity
The jeweller then tests the gold to establish its purity. Jewellery marked 22K, for example, is expected to contain 91.6% gold, while 18K jewellery contains 75% gold.
Testing can be done using an X-ray fluorescence (XRF) machine, which assesses the metal's composition without damaging the jewellery. However, XRF testing measures the surface composition, so the results may need further verification in some cases.
Step 4: Apply the old-gold buying rate
Once the net weight and purity are established, the jeweller applies the relevant old-gold buying rate. The retail rate displayed by a jeweller for selling new gold jewellery is not necessarily the rate at which it will purchase your old jewellery.
Bafna says consumers should check the actual buying rate for the assessed purity on the date of sale, rather than relying on the headline market price.
Step 5: Account for deductions and arrive at the payout
The buyer then accounts for any applicable charges or deductions, such as testing, processing, or refining costs, before arriving at the final amount payable.
The seller should ask for each deduction to be explained separately rather than accepting a single lump-sum valuation.
How much is your old gold jewellery worth? Understand the calculation
Consider a 20-gram piece of 22K jewellery containing 1.5 grams of stones.The net gold weight is 18.5 grams. Since 22K gold contains approximately 91.6% pure gold, the piece contains around 16.95 grams of pure gold.
If the 24K reference price is ₹13,800 per gram, the indicative gold value works out to approximately ₹2.34 lakh before deductions.
This is an illustrative calculation using the rate in the example; it is not a live gold-price quote.
| Particulars | Calculation |
| Gross jewellery weight | 20 grams |
| Stone weight | 1.5 grams |
| Net gold weight | 18.5 grams |
| Purity | 22K (91.6%) |
| Pure gold content | 16.95 grams |
| Illustrative 24K reference rate | ₹13,800 per gram |
| Indicative gold value | ₹ 2,33,855 |
This is the value before any applicable deductions or difference between the reference price and the buyer's actual old-gold buying rate.
Even a small deduction can make a meaningful difference to the payout. In this example, every 1% deduction on the indicative gold value would reduce the amount received by around ₹2,339, explains Prithviraj Kothari, MD, RiddiSiddhi Bullions.
Gold rate displayed by the jeweller vs old-gold buying rate: Which should you compare?
A jeweller's retail rate is the price at which it sells gold to customers. The old-gold buying rate is the price at which it is willing to purchase gold from them.The latter may account for acquisition, handling, testing, and refining costs.
The difference between the two rates can directly affect the amount a customer receives, says Bafna.
For example, a difference of ₹100 per gram translates into ₹1,000 on 10 grams of gold and ₹5,000 on 50 grams.
Therefore, ask the jeweller for the specific old-gold buying rate applicable to your jewellery's tested purity. If the jeweller uses a 24K reference rate to value 22K or 18K jewellery, ask how the conversion is being calculated.
Also check whether processing or refining costs are already included in the quoted buying rate. Otherwise, you may end up paying for the same cost twice.
Sellers should compare the final payout offered by different buyers for the same assessed weight and purity. A buyer may offer a seemingly attractive rate but apply a larger deduction elsewhere. Another may quote a lower rate but make fewer deductions, says Kothari.
Old gold sale: Which deductions are legitimate and which should raise a red flag?
Not every deduction made by a jeweller is unfair. However, each deduction should have a clear and measurable basis. Here are the key deductions you should understand before accepting an offer.1. Stone and non-gold component weight
If your jewellery contains gemstones, enamel, lac or wax, their weight should be excluded from the net gold weight. You should ask the jeweller to show the gross weight and the weight deducted separately.
Do not accept a large blanket deduction without being told how the non-gold weight was assessed.
2. Purity-related deductions
A piece may be marked 22K but test at a lower purity because of its composition, soldering or earlier repairs. The valuation should reflect the purity established through testing.
However, check how the buyer has accounted for purity. If the buying rate is already based on the tested purity, an additional purity-related deduction may result in double counting.
3. Melting and refining charges
Some buyers may charge for melting or refining the jewellery to establish the recoverable gold content. Such costs may be legitimate depending on the assessment process, but they should be disclosed upfront.
Bafna cautions against overlapping charges. Testing, melting and refining are different processes, and a buyer should explain which service is being charged for and why.
4. Soldering and repair-related deductions
Old jewellery may have soldered joints or additions made during repairs. These can affect the purity of the piece.
The impact should be reflected in the purity assessment rather than through an arbitrary percentage cut without an explanation.
5. Wastage and other percentage deductions
Ask what the deduction represents and how it is calculated. An unexplained percentage reduction, particularly when the buyer has already accounted for purity and processing costs, should make you question the offer.
Have a BIS hallmark and HUID? It can strengthen your bargaining position
If your jewellery carries a BIS hallmark and a six-digit alphanumeric Hallmark Unique Identification (HUID) number, check its details before approaching a buyer.You can verify the HUID through the BIS CARE app. A valid hallmark provides information about the certified purity of the jewellery and can help reduce uncertainty during valuation.
A hallmark and HUID can strengthen a seller's bargaining position because the buyer has a certified purity reference. However, a jeweller may still conduct its own purity test, generally using a non-destructive XRF machine, says Kothari.
Do not agree to melting or scraping your jewellery without your consent. If the jeweller's test indicates a lower purity than the hallmark, ask for the test result in writing rather than accepting a reduced offer immediately.
You can also approach a BIS-recognised Assaying and Hallmarking Centre to get the jewellery tested for a fee. If a purity shortfall is confirmed, you can raise a complaint through BIS.
Kothari also points out that BIS provisions provide for compensation in cases of a confirmed shortfall in the purity of hallmarked jewellery. Before making a claim, check the applicable BIS complaint and compensation process.
Should you sell old jewellery to the original jeweller?
Many consumers prefer returning to the store where they purchased their jewellery, assuming that the original jeweller will offer a better price.But selling it back to the same store does not guarantee a higher cash payout.
Jewellers may offer 100% exchange value on their own jewellery, but this does not necessarily mean they will pay the full gold value in cash. Cash buybacks may carry deductions of around 3–5%, depending on the jeweller and transaction, says Kothari.
Remember that the making charges paid when buying the jewellery are generally not recovered when you sell it. The GST paid at the time of purchase is also not refunded.
A bill that separately records stone weight can be particularly useful when negotiating the deduction for non-gold components.
Selling old gold jewellery should not mean accepting an unexplained reduction in its value. Understand how the weight is calculated, check the purity, insist on the applicable old-gold buying rate, and question every deduction.
The Economic Times Business News App for the Latest News in Business, Sensex, Stock Market Updates & More.
The Economic Times News App for Quarterly Results, Latest News in ITR, Business, Share Market, Live Sensex News & More.