India's steel ambitions run into a coking coal import dependence

India meets more than 90% of its coking coal requirement for steelmaking through imports. Despite abundant natural resources, the country also struggles to produce enough usable coking coal for its steel industry. What will it take for the world’s...

iStock

India's steel industry relies heavily on imported coking coal, which poses risks to production and costs. Steelmakers emphasise that while imports are necessary, enhancing domestic coal's usability is crucial.

India’s industrialisation drive seems to have a raw-material paradox at its core. The country needs more steel to build infrastructure, expand its manufacturing base, and support its development ambitions. But producing that steel requires coking coal, a critical raw material that India still sources in large quantities from overseas.

Coking coal, a key category of metallurgical coal used in iron and steel production, is one of the key inputs for the blast furnace-basic oxygen furnace (BF-BOF) method used by integrated steelmakers in India, the world’s second-largest producer of crude steel. The country produces around 41% of its steel using this method, as per Joint Plant Committee data cited by the steel ministry.

During steelmaking, coking coal is heated in the absence of air to produce coke. The coke acts as a fuel and reducing agent in the blast furnace, where iron ore is converted into molten iron. This molten iron is then processed in the basic oxygen furnace to produce steel. The cost and availability of coking coal, therefore, directly impact the economics of blast furnace-based steelmaking.


For India, the scale of this raw material’s import is a concerning factor. In FY26, the country imported 66.33 million tonnes (MT) of coking coal, meeting 91.79% of its total requirement of 72.26 MT through imports, according to provisional data provided by the Ministry of Coal in the Lok Sabha. At current international prices, this import volume represents a considerable outflow of foreign exchange for Indian steelmakers.

India’s domestic coking coal, meanwhile, has a relatively high ash content, which makes it unsuitable for direct use in coke-making. Therefore, it must be washed to remove impurities and reduce ash levels before it is converted into coke. Washed domestic coal can also be blended with imported, lower-ash coking coal to meet steelmakers’ quality requirements.

In FY26, India produced just 5.93 MT of washed coking coal, meeting barely 8.2% of the country’s total coking coal requirement of 72.26 MT, according to the coal ministry. This has left Indian steelmakers heavily dependent on overseas supplies to meet their coking coal requirements. The dependence persists, even with India’s estimated 37.37 billion tonnes of geological coking coal resources. This highlights the gap between the country’s resource potential and its ability to produce usable metallurgical coal. So, the main challenge for the steelmakers is not the absence of coal, but the limited availability of low-ash, washed coking coal suitable for modern coke-oven batteries. The coal ministry has identified limited domestic availability of high-grade coking coal as a reason for continued imports.
ADVERTISEMENT

High import volumes pose another challenge for the domestic steel industry. Anil Kumar Chaudhary, Ex-chairman of Steel Authority of India Ltd (SAIL), says dependence on imported coking coal adds significantly to steelmakers’ costs and could become a potential bottleneck to the industry’s expansion. “Coking coal is one of the biggest constraints on India’s steel industry, accounting for a substantial share of production costs and exposing producers to international price volatility,” says Chaudhary. He adds that this dependence also leaves steelmakers vulnerable to disruptions in supplies from major exporting countries.

In FY26, India’s coking coal imports rose 15.2% to 66.33 million tonnes from 57.58 million tonnes in FY25, underlining how import dependence has widened with the expansion of domestic steel production. As per the steel ministry’s data, India produced 170.15 MT of crude steel in FY26, compared to 152.18 MT in FY25 and 144.30 MT in FY23. With steel production increasing, the need for coking coal will increase further.

india_crude_steel_production_chart_250kb-2
The price volatility is equally significant, given that coking coal accounts for nearly 40% of steel production costs, as per industry experts. The draft National Steel Policy puts the price of Australian hard coking coal at $278 per tonne FOB in September 2026, compared with an average of $236 per tonne during January-July 2026, according to Reuters. The increase has a direct bearing on steelmakers’ costs. Every $10 per tonne rise in coking coal prices adds an estimated $7-9 per tonne to steelmaking costs, an executive at a large Indian steel mill told the publication.

Rananjay Singh, Chief Operating Officer of Enso Group, a diversified natural resources and energy group, describes this dependence as a structural vulnerability for the Indian steel industry. “Coking coal is one of the clearest structural vulnerabilities in India’s steel growth story,” he says, adding that the high import share leaves producers exposed to international market movements, which derail their operational planning.
ADVERTISEMENT

The domestic coal gap

The gap between geological resources and usable coal is central to India’s import-dependence problem. A NITI Aayog report on domestic coking coal availability notes that the high ash content of Indian coal makes washing necessary before it can be blended with imported low-ash coal for coke-making. In other words, India’s challenge is not merely mining more coking coal but upgrading it to the low-ash specification required for coke-making. The NITI Aayog’s report states that domestic coal generally contains 34-38% ash, and it must be washed to lower the ash level to 16-18% for this purpose.
ADVERTISEMENT

Enso Group’s Singh argues that the immediate priority for the industry should be to improve the quality and recovery of domestic coal rather than focusing only on higher raw production. “The quickest domestic opportunity is not simply producing more coal; it is producing more usable metallurgical coal. If we can do that, we can, to some degree, move towards reducing our import dependence,” he says.

The country’s washing figures cited in the draft National Steel Policy underline the severity of the issue and show the need to work urgently on domestic capacity building. The document puts India’s operational coking coal washing capacity at around 39 million tonnes per annum (MTPA), but estimates washed output at about 6 MT from nearly 17 MT of feed coal. This implies average yields of around 30%. These figures point to a gap between installed capacity and the quantity of usable washed coal being recovered across the country.

Making domestic coal usable

SAIL’s Ex-chairman identifies domestic mining and the development of washeries as key measures to address the challenge. He also points to improvements in coal-blending technology to increase the contribution of indigenous coal to steelmaking. “Domestic coking coal must contribute meaningfully to the blend; complete import substitution is neither realistic nor necessary,” he says. His assessment reflects the limits of a strategy based solely on replacing imports with domestic supplies. The industry will continue to need imported coal, but improving the quality of indigenous material could allow steelmakers to use a larger domestic share in their blends.

Ashis Mahapatro, CEO (Steel) at Greta Energy, also sees washeries and blending technology as critical to improving the usability of Indian coal, which ultimately can cut the country’s coking coal import dependence, too. Mahapatro believes improving the quality and usability of domestic coking coal could help steelmakers reduce their reliance on imported supplies. He sees expanded washeries, research and development (R&D), and technology-led blending as critical to this effort. “Indian coal can play a larger role if expanded washeries, sustained R&D, and AI-enabled blending maintain the coke quality that blast furnaces depend on,” Mahapatro says. Greta Energy is developing an integrated, low-carbon green steel complex in Maharashtra.

Enso’s Singh also points to better coal beneficiation, improved washery performance, and more effective blending as ways to increase the usable share of domestic coking coal.

Imports to remain part of the supply mix

Until domestic washing and blending improve, coking coal will remain one of the most exposed links in India’s steel supply chain. A spike in global prices, a disruption at a major exporting country, or a slowdown in Australian supply can quickly translate into higher steelmaking costs. For an industry central to India’s infrastructure and manufacturing ambitions, managing that exposure is becoming as important as expanding capacity. Even with improvements in domestic production and processing, industry officials do not expect imports to disappear. Chaudhary says complete import substitution is neither realistic nor necessary, while Mahapatro argues that diversified sourcing and long-term supply arrangements will remain important for steelmakers.

The coal ministry’s import data shows the concentration of India’s overseas sourcing. In FY26, Australia, whose coking coal contains only 8-10% of ash, accounted for 27.32 MT of India’s coking coal imports, followed by the US at 9.91 MT and Russia at 9.25 MT, according to official government data. However, there has been a visible diversification in the source mix in recent years. Australia’s share in India’s coking coal imports declined to about 54% in 2025 from 73% in 2019, while the US, Russia, and other suppliers gained share, according to a steel ministry submission to a parliamentary standing committee. This diversification offers steelmakers some protection against supply disruptions or price shocks in any single exporting market. However, it does not reduce the industry's underlying dependence on overseas supplies.

Pranav Bansal, Managing Director and CEO of Bansal Wire Industries, a manufacturer of quality stainless steel wires, says dependence on imported coking coal also creates raw-material cost and supply risks for downstream steel-consuming industries. “Reducing raw-material vulnerability remains a key challenge, particularly as India imported 66.33 MT of coking coal in FY26. Greater domestic availability, diversified sourcing and efficient resource utilisation can only help manage costs and mitigate supply risks,” he says.

The stakes for steelmakers are likely to rise significantly in the coming times. Around 78% of India’s tracked steelmaking capacity under development is based on the basic oxygen furnace (BOF) route, compared with a much smaller share for electric arc and induction furnaces, Global Energy Monitor’s data show. With this, India’s demand for coking coal will increase further.

The coal ministry’s import-substitution strategy estimates that India will need about 161 MT of coking coal by 2030-31 to support a 300 MTPA steelmaking capacity target, including 181 MTPA through the blast furnace route. For now, imported coking coal will remain central to India’s steelmaking. But industry officials agree that the priority is not complete import substitution; the aim should be to enhance the value of domestic coal by improving washing, increasing recovery, and blending in a way that maintains coke quality. As SAIL’s Chaudhary puts it, domestic coking coal must contribute meaningfully to the blend, even if it cannot replace imports altogether.
Download
The Economic Times Business News App
for the Latest News in Business, Sensex, Stock Market Updates & More.
READ MORE
ADVERTISEMENT

READ MORE:

LOGIN & CLAIM

50 TIMESPOINTS

More from our Partners

Loading next story
Business News › Small Biz › Trade › Exports › Insights › India's steel ambitions run into a coking coal import dependence
Text Size:AAA
Success
This article has been saved

*

+