Tape on broom cleaning hack: Why this simple household trick works, how to apply it and clean floors more easily

Household cleaning tasks can often be made simpler by using everyday items in practical ways. One such homemade trick that has gained attention involves attaching tape to the broom before sweeping. The method is intended to help the broom collect light dirt and debris more effectively while reducing the amount of dust and particles that get pushed around during cleaning.

Tape Helps Collect Small Debris

When you sweep the floor, the adhesive side of the tape can act as a lint and small debris catcher. It may pick up particles that otherwise get trapped between the broom bristles or are pushed across the floor instead of being collected.

The main purpose of the trick is to help gather lint, hair, and light fibers that can be difficult to collect with regular sweeping. By adding a sticky surface to the broom, these lightweight particles are less likely to move around while you clean.

A Simple Cleaning Hack to Try

The technique requires only a small piece of tape and a regular broom, making it an easy household cleaning idea. However, the adhesive should be used carefully and removed after cleaning to prevent sticky residue from transferring onto floors or surfaces.

How to Put Tape on the Broom?

• Using this cleaning hack is quick and requires no changes to the broom itself.
• Cut a suitable piece of tape according to the size of your broom.
• Attach the tape to the bristles or underside of the broom.
• Keep the sticky side facing downward so it can come into contact with loose debris.
• Sweep the floor as you normally would, focusing on areas where hair, lint and fibres tend to collect.
• Once the tape becomes covered with dirt and loses its stickiness, peel it off and replace it with a fresh piece.

Check the Floor Surface Before Trying the Hack

Before using the tape-on-broom method, consider the type and finish of your flooring. Smooth and durable surfaces may be less likely to be affected by the adhesive.

Be careful with delicate surfaces, unfinished wood, specially treated floors or materials where tape could leave behind sticky residue or damage the finish.

For safety, first test the tape on a small, inconspicuous area. If there is no residue or visible damage, you can proceed with the cleaning method.