WPA3: Know what is it and how to get it on Wi-Fi Router

WPA3 comes as a successor to WPA2 - a wireless network security algorithm used in Wi-Fi networks. Its introduction dates back to 2018, and after July 2020, all Wi-Fi devices that are certified must support it. Compared to WPA2, WPA3 is considered to be a more secure encryption method.

How to get WPA3 on Wi-Fi Router?

Well, there are several methods to help someone how to upgrade their home Wi-Fi network to WPA3 encryption, there are three potential scenarios.


First and foremost, if you have a new router certified after July 1, 2020, it should support WPA3, and you can enable it in the network settings. However, if older Wi-Fi devices drop off your network, switch to WPA2/WPA3 Transitional mode.

Secondly, if you have an older router, but not too old, that can get WPA3 with a firmware update, you're in luck. WPA3 is a software-based upgrade over WPA2, and many routers can support it with firmware updates. Before upgrading to a new router, check if your manufacturer has released firmware updates for WPA3 support.

However, if you have an old router that does not support WPA3 and won't receive firmware updates, it's probably time to upgrade your router. Even if you're not interested in WPA3, upgrading your router will provide better hardware, coverage, and access to more advanced features. Router technology advances over time, so even if your router is just 3-5 years old, it may not provide the best performance.

FAQs

1. What does WPA3 stand for?
   Wi-Fi Protected Access 3
2. What is the most common Wi-Fi password?
   As per NordPass report, "123456" is the most common Wi-Fi password, followed by "123456789" and "12345."