India's hot new glass-and-concrete obsession hides a costly trap for generations
India's rapid urban development has led to buildings that often fail to cope with extreme heat. Reliance on glass facades increases indoor temperatures and electricity consumption. Traditional architectural elements like courtyards and jaalis coul...

Today, much of India's urban landscape tells a different story, as shown in this photo from Mahatma Gandhi Road in Kolkata, West Bengal
Today, however, much of India's urban landscape tells a different story. The deep veranda has shrunk into a narrow balcony, courtyards have disappeared behind apartment walls, and expansive glass façades have become the defining feature of contemporary buildings.
Also Read | From rocks to riches: India’s unfinished critical minerals story
As temperatures soar and the electricity required to keep these buildings cool mounts, an uncomfortable question is emerging: in the pursuit of architectural modernity, has India forgotten how to build for its own climate?
Could the answer to some of these problems lie in architectural traditions that India once considered old-fashioned?
According to the Bureau of Energy Efficiency (BEE), buildings already account for more than 30% of India's total electricity consumption. The country is constructing an estimated 3,00,000 square feet of commercial floor space every day. More significantly, 40% of the building stock that will exist over the next two decades is yet to be built.
In other words, the architectural decisions India makes today will have consequences for generations.
The glass dream
On a hot afternoon, a glass-fronted office can quickly become a study in contradictions: sunlight heats the interiors, blinds are drawn against glare, and air conditioners work overtime to keep the space cool.Sugeet Grover of the Centre for Science and Environment's Sustainable Habitat Programme has seen this problem play out repeatedly.
"Glass in itself will allow direct heat to enter and, because of the greenhouse effect, will not allow the heat to exit," he told ET Online.
Also Read | India’s bid to keep carbon cash home as Europe adds a new trade cost
He also points to the heat reflected by glass buildings towards the ground, potentially adding to the discomfort of surrounding spaces. Inside, excessive daylight and glare can make occupants abandon natural lighting altogether.
The consequences extend well beyond comfort. Greater heat gain means greater dependence on air conditioning, translating into higher electricity bills and a larger carbon footprint.
The numbers suggest that this is becoming a substantial national concern.
According to the International Energy Agency's Electricity 2025 report, India's electricity peak load rose from 148 GW in 2014 to 250 GW in 2024, an increase of nearly 69%. Cooling demand is an important part of this changing energy landscape.
The IEA estimates that cooling equipment contributed approximately 60 GW to India's peak electricity load in 2024, even though fewer than one in five Indian households owned an air conditioner. Sales of air conditioners reached a record 14 million units that year, 27% higher than in 2023.
By 2030, cooling equipment could account for around 140 GW of peak demand.
The BEE's electricity consumption assessment for 2023-24 offers another snapshot.
India's buildings consumed approximately 500 terawatt-hours of electricity that year, according to Central Electricity Authority figures cited in the report. Of the 197.7 TWh mapped by BEE through its appliance and end-use programme, cooling accounted for 123 TWh, including room air conditioners, ceiling fans and light commercial air-conditioning systems.
Kalyani Roy, a Kolkata-based Conservation Architect who works with heritage buildings, said the building envelope (the outer layer separating indoor spaces from the elements) is crucial to determining how much heat enters a structure.
In India's hot-dry and hot-humid regions, she explained, large glazed surfaces can make achieving the required insulation expensive, while also increasing electricity consumption.
"The U-value of the glasses used in the building facades determines that insulation level," she explained to ET Online, referring to a measure of how readily heat passes through a material.
The problem, then, is not necessarily glass itself, but the indiscriminate use of it without sufficient consideration of orientation, shading, insulation and local climatic conditions.
What our ancestors understood
In traditional architecture, the angan (courtyard)created an open-to-sky space around which rooms were arranged, encouraging air circulation and helping regulate the indoor environment. Jaalis filtered sunlight while allowing breezes to pass through. Deep verandas offered shade, and thick masonry walls slowed the transfer of external heat indoors.Roy describes the courtyard as a space that "initiates the circulation of air within the compound". It also creates what she calls "microclimatic thermal comfort within the habitat".
A 2023 study published in Advances in Building Energy Research, titled Impact of Courtyard on Indoor Thermal Environment in Vernacular Row Houses of Warm and Humid Climate, examined traditional houses in Edalakudy, in Tamil Nadu's Kanyakumari district.
The researchers found that an effectively designed courtyard could reduce indoor temperatures by 2-4 degrees Celsius. High thermal mass, increased ventilation, external shading, and the positioning of openings around the courtyard were among the factors contributing to improved thermal performance.

The principles are not restricted to traditional homes.
Grover points to Delhi's India Habitat Centre as an example of how contemporary architecture can reinterpret the courtyard. Its internal open spaces are shaded by a structural space frame, performing a function that trees might have served in traditional courtyards.
"All of these principles can still be applied," he said, arguing that the emphasis should be on recovering the logic of traditional design rather than reproducing old buildings wholesale.
He called this “passive architecture” or “passive design”: constructing buildings in response to the sun, wind and natural resources around them.
A 350-mm-thick wall, such as the kind Grover recalls from traditional homes in West Bengal’s Bolpur, might offer substantial thermal resistance. But replicating such construction in a densely populated city, where every square foot carries a price, is not necessarily practical.
The future, therefore, may lie in combining traditional intelligence with contemporary materials and construction techniques: shaded façades, appropriately oriented windows, ventilated corridors, courtyards and better-performing building envelopes.
The comeback of vernacular design
The Energy Conservation Building Code (ECBC), introduced in 2007 and updated in 2017, established energy-efficiency requirements for applicable commercial buildings.In 2024, the Bureau of Energy Efficiency introduced the Energy Conservation and Sustainable Building Code (ECSBC), expanding the framework to include broader sustainability considerations.
Under its prescriptive compliance provisions, the 2017 code sets a maximum window-to-wall ratio of 40%, alongside requirements for glazing performance and building-envelope insulation.
Eco-Niwas Samhita, introduced in 2018 and subsequently updated in 2024, addresses energy conservation and building-envelope performance in residential buildings.
However, these national frameworks depend on state-level adoption and implementation, leaving considerable gaps in their application across the country.
The government estimated at the time of its launch that ECBC-compliant commercial buildings could achieve energy savings of at least 25%, with higher performance categories targeting savings of 35% and 50%.

Grover said India's energy-efficiency provisions are reasonably developed, but their implementation remains uneven.
"There is a very big gap between somebody making a code and it coming down to implementation to every building in the country," he said.
There are practical obstacles, too. Roy said architects and developers are showing interest in vernacular principles, but traditional construction is not always easy to execute at scale.
"The main barrier is the limited technical knowledge system of producing traditional construction materials and limited artisans for the construction," she told ET Online.
The dwindling availability of skilled craftspeople, the time involved in traditional construction and the cost of sourcing certain materials can make these approaches less attractive to developers.
Buyers, meanwhile, often associate contemporary living with modern materials and international design trends.
A structure that absorbs less heat could reduce its dependence on air conditioning over its lifetime. Grover suggested that, under suitable circumstances, the requirement for air conditioning could be reduced by as much as 70%.
This is an expert estimate, not a universal performance guarantee, and actual savings would depend on building design, climate and occupancy.
The IEA's projections make the stakes difficult to dismiss.
Its 2026 analysis suggests India's cooling demand could more than double by 2035 under existing policy settings. The question is whether buildings can be designed to moderate that demand before the country becomes even more dependent on energy-intensive cooling.
Perhaps the most useful lesson from India's architectural past is not that every new home needs a courtyard or every modern office must abandon glass. It is that buildings should respond to the places in which they stand.
The angan, the jaali, the terracotta wall and the shaded veranda were never merely decorative expressions of a bygone era. They represented generations of accumulated knowledge about living comfortably in a difficult climate.
The Economic Times Business News App for the Latest News in Business, Sensex, Stock Market Updates & More.
The Economic Times News App for Quarterly Results, Latest News in ITR, Business, Share Market, Live Sensex News & More.